Technical reference · English
ATK-MED Modular medical power supply system for Class II medical places
The main functions and purposes of safety power supplies
Automatic transfer switches can be configured to change over between normal and standby supplies. Determine the applicable standard edition, supply classification and transfer requirements in the project design.
An online UPS provides backup power following a supply failure. The 15–60 minute backup time shown here is an example; actual runtime depends on the load, energy-storage configuration and operating conditions.
Medical isolated power systems help reduce risks associated with leakage to earth and maintain supply continuity after the first insulation fault. Determine leakage criteria for the specific equipment and system design.
Complete configuration of safety power supply for hospital Class 2 locations
PC-level automatic switching dual power supply device
PC-level automatic switching dual power supply, meeting AC-33A usage category, safe switching speed, permanent magnet drive
Rated current 16A ~ 4000A, suitable for operating rooms and ICUs
Online UPS uninterruptible power supply
Online UPS uninterruptible power supply system, rated capacity: 10kVA
Modular design, professional appearance design of hospital premises
2.5 TU highly modular built-in chassis
Professional medical isolated power supply and distribution system
Professional medical isolated power supply and distribution system, rated capacity: 3.15kVA ~ 10kVA
Power distribution capacity: 12-channel IT system / 12-channel TN system
Modular lithium battery energy storage module
17.5Kg/module, 2.5kWh/module
Built-in BMS system, remote control and communication in the chassis
Configuration example: a 10 kVA application with 5 kWh of energy storage in two modules, targeting 30 minutes of backup. Calculate actual runtime from the load power, system efficiency and usable capacity.
Complete functions and communications
Dimensions: 1800mm high * 620mm wide * 400mm deep
Example system weight: 275 kg. Confirm the actual equipment weight from the ordered configuration; a structural engineer must determine the floor-load capacity.
The modular structure facilitates transportation and installation in pieces. The weight, handling method, number of operators and installation conditions of each module should be determined according to the ordering configuration and on-site safety requirements.
Communication: Supports wired and wireless communication methods
