Technical reference · English
Provide stable and monitorable power guarantee for every critical diagnosis and treatment
ATK-MED medical IT isolated power supply system is designed for operating rooms, ICU and other places. It integrates isolated power supply, insulation monitoring, fault location, UPS continuous power supply and BMS battery management.
From "safe power supply" to "active sensing"
Establish clear multi-layer security protection around medical electrical continuity, fault visualization and operation and maintenance efficiency.
electrical isolation
Use medical isolation transformers to reduce the impact of single-point ground faults on critical loads and build a safe power supply boundary for diagnostic and treatment equipment.
Real-time monitoring
Continuously monitor the insulation status and branch circuit faults, and output alarm information in a timely manner so that abnormal conditions can be discovered and located faster.
Continuous protection
UPS and BMS collaborate to manage backup power and continue to support the stable operation of critical medical loads when the power grid is abnormal.
Integrated system architecture
The core equipment works together according to functions, covering the entire link of isolation, monitoring, positioning, backup power supply and battery management.
Medical isolation transformer builds ungrounded power supply system
ATK-MED712 insulation monitor continuously identifies insulation risks
Fast fault locking of current transformers and IFLS616 branch positioning module
UPS and BMS provide continuous energy guarantee for critical loads
Three core competency modules
Unified equipment vision and parameter expression make the solution structure more intuitive and the selection information easier to read.
Isolation, monitoring and positioning
IFLS616 supports 100 ms polling and can monitor more than 50 loops, helping operation and maintenance personnel locate abnormal branches faster.
Medical UPS continuous power supply
With the power frequency machine and SCR architecture, the instantaneous output can reach 3-5 times the rated current; the backup time is about 30-45 minutes, depending on the configuration and load.
BMS battery fine management
The voltage measurement accuracy is 1 mV, supports passive equalization and 10 ms communication, and provides a data basis for backup power status management.
Internet capabilities for smart hospitals
The system supports CAN, RS485, RS232 and other communication interfaces, and can be connected to the monitoring and energy management system to achieve centralized viewing of equipment status, alarms and operating information.
Multi-protocol interface adapts to different system architectures
Centralized presentation of key operating status
Reserve data channels for remote operation and maintenance and energy efficiency management
Project Practice of Shaoxing People’s Hospital, Zhejiang
An overview of the system application at Shaoxing People’s Hospital in Zhejiang.
Operating room and ICU critical load protection
The project was installed in August 2024. The ATK-MED system is used to support safe power supply and operational monitoring of key medical locations in the hospital.
R&D results and quality certification
With R&D accumulation, testing materials and quality system, we provide support for the engineering application of medical electrical solutions.
Patents and software copyrights
Continue to accumulate research and development results related to medical power supply, monitoring and energy management, and strengthen system autonomy.
Testing and certification materials
Testing and certification documents must match the equipment model, scope and validity period. For the applicability of TUV MARK, CQC, CCC, GB/T 7251.12-2013 and GB/T 7251.8-2020, refer to the complete certificates and test reports for the relevant equipment.
Protect key diagnosis and treatment scenarios with a perceivable, positionable, and sustainable power supply system
From core equipment to communication interfaces, from project delivery to operation management, ATK-MED builds a more complete safe power supply foundation for medical institutions.
