Product photography
View full sizeMedical power
Build the isolated supply for medical locations
For Group 2 medical locations, this transformer provides isolated power to operating rooms and intensive-care areas. It can work with temperature control, load-current measurement and insulation monitoring. Confirm the ATK-MED series capacity and associated equipment against the load, allowing supply and condition monitoring to be planned together.
Medical system applicationExplore power distribution for hospital Group 2 locationsExplore how isolation power, monitoring, alarms and critical loads work together.Explore technical detailsPRODUCT INSIGHTS
Provides isolated power for medical power systems in operating rooms and intensive-care areas.
A temperature-control signal can be used with a compatible controller to observe transformer temperature.
Can be combined with load-current transformers, insulation monitors and signal-acquisition devices.
Industry photographBUILT FOR YOUR ENVIRONMENT
TECHNICAL SPECIFICATIONS
ATK-MED3150–ATK-MED10000 series, 3.15–10 kVA.
Product-page stated leakage-current value: 100 μA.
Built-in temperature sensor with a PTC switching output for temperature signalling.
ATK-MED3150 / 4000 / 5000: 260 × 220 × 365 mm; ATK-MED6300 / 8000: 280 × 190 × 419 mm; ATK-MED10000: 280 × 220 × 427 mm (L × W × H).
Technical reference · English
| Electrical performance parameters |
|---|
PTC switching output (temperature control signal)
| Product selection |
|---|
| Matching accessories |
|---|
Load current transformer, PTC thermostat, medical insulation monitor, signal acquisition device
| Product size |
|---|
Dimensional drawing
Circuit diagram
Select the model and configuration for your supply system, load and installation conditions. Use the applicable product documentation for installation and operation.
EXPLORE MORE
Medical power
Observe insulation in medical isolated power systems
ATK-MED712 monitors insulation in medical IT power systems for Group 2 medical locations. Define the monitoring needs from the system’s purpose, then use the technical information to confirm functions, interfaces and compatible equipment when selecting the monitor for the medical power scheme.
Medical power
Medical power
Clear status and alarms for isolated power systems
ATK-P816 is a single-system alarm display for medical isolated power systems. Used with ATK-SC10, it displays insulation, load-current and temperature status with audible/visual alerts and Chinese/English information. ATK-P86 is the multi-system network master; relay and authorised pairing features depend on the project configuration.
Medical power
Medical power
Mobile power for intensive-care and emergency equipment
Designed for ICU and emergency-care equipment, this mobile medical isolated power system provides multiple outputs with short-circuit and overload protection. Filtering, shielding and selected monitoring functions are optional. Confirm the isolation transformer, monitor and accessories separately against the equipment’s supply requirements.
Medical power